頻譜分析儀
Agilent 安捷倫 N9020A MXA Signal Analyzer 信號分析儀 10 Hz to 26.5 GHz
Agilent
安捷倫
N9020A
MXA Signal Analyzer
信號分析儀
10 Hz to 3.6, 8.4, 13.6, or 26.5 GHz
Option 503 10 Hz to 3.6 GHz 10 MHz to 3.6 GHz
Option 508 10 Hz to 8.4 GHz 10 MHz to 8.4 GHz
Option 513 10 Hz to 13.6 GHz 10 MHz to 13.6 GHz
Option 526 10 Hz to 26.5 GHz 10 MHz to 26.5 GHz
The N9020A MXA is a flexible signal analyzer; 10 Hz up to 26.5 GHz with up to 160 MHz analysis bandwidth. Designed to test multiple wireless formats and devices with built-in applications.
安捷倫
N9020A
MXA Signal Analyzer
信號分析儀
10 Hz to 3.6, 8.4, 13.6, or 26.5 GHz
Option 503 10 Hz to 3.6 GHz 10 MHz to 3.6 GHz
Option 508 10 Hz to 8.4 GHz 10 MHz to 8.4 GHz
Option 513 10 Hz to 13.6 GHz 10 MHz to 13.6 GHz
Option 526 10 Hz to 26.5 GHz 10 MHz to 26.5 GHz
The N9020A MXA is a flexible signal analyzer; 10 Hz up to 26.5 GHz with up to 160 MHz analysis bandwidth. Designed to test multiple wireless formats and devices with built-in applications.
Specifications:
– It is within its calibration cycle
– Under auto couple control, except when Auto Sweep Time Rules = Accy
– Signal frequencies < 10 MHz, with DC coupling applied
– The analyzer has been stored at an ambient temperature within the allowed operating range for at least two hours before being turned on; if it had previously been stored at a temperature range inside the allowed storage range, but outside the allowed operating range
– The analyzer has been turned on at least 30 minutes with Auto Align set to normal, or, if Auto Align is set to off or partial, alignments must have been run recently enough to prevent an Alert message; if the Alert condition is changed from Time and Temperature to one of the disabled duration choices, the analyzer may fail to meet specifications without informing the user
– It is within its calibration cycle
– Under auto couple control, except when Auto Sweep Time Rules = Accy
– Signal frequencies < 10 MHz, with DC coupling applied
– The analyzer has been stored at an ambient temperature within the allowed operating range for at least two hours before being turned on; if it had previously been stored at a temperature range inside the allowed storage range, but outside the allowed operating range
– The analyzer has been turned on at least 30 minutes with Auto Align set to normal, or, if Auto Align is set to off or partial, alignments must have been run recently enough to prevent an Alert message; if the Alert condition is changed from Time and Temperature to one of the disabled duration choices, the analyzer may fail to meet specifications without informing the user